Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using Stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of Stainless steel to prevent corrosion from occurring.

The austenitic Stainless steel 316L has been compared to duplex Stainless steels to be able to highlight a choice of material for manufacturing of spare tanks used for cooling water at nuclear power stations on the Swedish west coast. In this report 316L and the duplex Stainless steels 2205, 2304 and LDX 2404 have been compared according to corrosion resistance, strength, manufacturing aspects and prices. The steels arranged by increasing corrosion resistance: 316L < 2304 < LDX 2404 < 2205. The steels arranged by increasing strength (considering the thickness of the plates needed for construction): 316L < 2304 < LDX 2404 and 2205. The steels arranged by increasing price/tank: 2304 < LDX 2404 < 2205 < 316L.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic Stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures Stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic Stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

This M.Sc. thesis is a material application evaluation commissioned by the advanced body engineering department at SAAB Automobile AB. The purpose of the thesis is to evaluate implementation of the innovative sandwich design material Hybrix into an automobile body. Today the most commonly material used in the body is galvanized steel sheets and by shifting material to Hybrix several problematic issues have to be dealt with. Hybrix is an innovative sandwich sheet that inherits thin Stainless steel face sheets and a Stainless steel fibrous core.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the Stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new modular design in a new material theinstrument tower has been improved in several aspects..

This bachelor thesis covers fire protection methods of structural steel and the aim is to develop an information tool designed for inexperienced structural engineers. The information tool covers basic fire protection methods and the general way to produce a fire resistance for structural steel. The layout of this information tool is a simple folder that contains information about the most important steps when producing fire protection for a steel structure.The thesis starts with a general overview of the fire protection needed in buildings to fulfill national legislative and regulatory requirements. To get an understanding of how steel components behave during the influence of fire, a brief overview is presented of the material properties of steel. This chapter also contains a review of previous research in the area.

The report aims to describe the austenitic Stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as Stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

Titel:Att förmedla budskap med Steel - Hur SSABs anställda uppfattar personaltidningenFörfattare:Tobias Anderberg och Daniel KarlssonUppdragsgivare:Svenskt stål AB (SSAB)Kurs:Examensarbete i Medie- och kommunikationsvetenskap vid Göteborgsuniversitet, Institutionen för journalistik, medier och kommunikationTermin:Vårterminen 2011Handledare:Jonas OhlssonSidantal:45 sidor, 11 616 ordSyfte:Att ta reda på om företagets personaltidning förmedlar mål, vision ochvärderingar så att de anställda identifierar demMetod:Kvantitativ webbenkätMaterial:Webbenkät med 293 svarande av totalt 712 anställdaHuvudresultat:Resultatet visar att budskapen om mål, vision och värderingar i Steel kan identifieras av läsarna. Steel upprätthåller denna kunskap. Det är inte någon stor skillnad på vad de anställda tycker om tidningen sett till vilket affärsområde de arbetar i. Det som de allra flest förväntar sig och får är kunskap om SSAB. De flesta anställda förväntar sig dock mer än vad deanser sig få ut av tidningen.